Introducing the Shop Fox W1745 6" x 46" Jointer with Mobile Base—a robust jointer designed for smaller workshops with enhanced mobility. This jointer boasts a substantial 6-inch size and a built-in mobile base for added convenience.
The oversized cast-iron fence of the W1745 provides exceptional control for edge-jointing wide boards, featuring stops at 45°, 90°, and 135°, along with a rack-and-pinion adjustment mechanism. The fine-adjust handwheel allows precise adjustment of the outfeed table relative to the cutterhead top dead center.
With a lever-adjusted infeed table for swift and accurate movement, the W1745 is equipped with a powerful 1 HP motor that spins the 3-knife cutterhead at 4800 RPM, effortlessly squaring your stock in a single pass. The high-speed steel (HSS) knives are heat-treated for hardness and wear resistance, ensuring a prolonged sharp edge.
As part of the Shop Fox jointer lineup, the W1745 comes with a 2-year warranty covering parts and guaranteeing freedom from factory defects (excluding consumables).
Your machine comes with a comprehensive, easy to follow manual written by the Woodstock HQ documentation department right here in the USA.
At Mark Newton Custom Woodcraft, we're dedicated to your satisfaction.
For all customer service inquiries especially those relating to ordering and fulfillment please click HERE or go to the Mark Newton Custom Woodcraft ‘Contact’ page to let us know how we can help you.
If you need technical support for your Shop Fox product, the Woodstock Technical Support team is here to assist. Reach them at (800) 840-8420 or email@example.com for expert guidance.
The jointer is CSA certified.
- Motor: 1 HP, 120V, single-phase, 13A
- Maximum stock width: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting capacity: 1/2"
- Minimum stock length: 8"
- Minimum stock thickness: 1/2"
- Cutterhead diameter: 2-1/2"
- Knives: 3 (HSS) 6" x 5/8" x 1/8"
- Cutterhead speed: 4800 RPM
- Cuts per minute: 14,400
- Table size: 6" x 46"
- Table height from floor: 32-1/2"
- Fence size: 35" L x 5" H
- Fence adjustment: positive stops @ ± 45°, 90°, 135°
- Overall dimensions: 46" W x 27-1/2" D x 32-1/2" H
- Approximate shipping weight: 280 lbs.
- Two-year warranty!!
- Center-mounted fence with positive stops at 45, 90, and 135°
- Built-in mobile base
- Built-in dust chute with 4" collection hood
- Quick adjusting lever on infeed table
- Fine control handwheel on outfeed table
- Easy access switch with a removable safety key
- Rack-and-pinion fence adjustment
- Pair of push blocks included
Upgrade your workshop with the Shop Fox W1745 Jointer—precision and mobility in one. Order now for a seamless woodworking experience!